Leistungs­übertragung

Ferroxcube bietet für unterschiedliche Betriebsbedingungen optimierte Materialien. Dabei sind Betriebstemperatur, magnetische Flussdichte und Frequenz die wichtigsten Parameter, um ein geeignetes Material zu wählen. Es sind Materialien mit einem Betriebstemperaturstandard von 100°C oder 60°C für Handgeräte oder 140°C im Automobilbereich, sowie für einen breiten Temperaturbereich von 20°C bis 100°C oder auch 60°C bis 140°C erhältlich. Leistungswandler arbeiten in Abhängigkeit von den Rahmenbedingungen Spannung, Leistung und Kostendruck in einem weiten Bereich möglicher Schaltfrequenzen: Für jeden Bereich bietet Ferroxcube spezielle Materialien, die für wenige kHz (Wechselrichter, Hochspannungs-Systeme), mittlere Frequenzen im Bereich von 10-100 kHz (Verbraucher- und Computer SMPS), hunderte kHz (hohe Effizienz, kompakte Umrichter) bis hin zu MHz optimiert wurden.

Ferroxcube’s Materialien tragen dazu bei, den Wirkungsgrad des Leistungswandlers durch die Verringerung der Verluste der magnetischen Komponenten zu verbessern, wodurch kleinere und damit kostengünstigere Kerne verwendet werden können.

Low Freq

Materialienµi  bei 25°CBsat (mT) bei
25°C (1200 A/m)		Tc
(°C)		p (Ωm)Ferrit-TypBemerkungDatenblatt
3C902300≈ 470≥ 220≈ 5MnZnmin. loss 100 °Cdownload PDF
3C942300≈ 470≥ 220≈ 5MnZnmin. loss 100 °Cdownload PDF
3C962000≈ 500≥ 240≈ 5MnZnmin. loss 100 °Cdownload PDF
3C982500≈ 530≥ 230≈ 5MnZnmin. loss 100 °Cdownload PDF
3C913000≈ 470≥ 220≈ 5MnZnmin. loss 60 °Cdownload PDF
3C931800≈ 520≥ 240≈ 5MnZnmin. loss 140 °Cdownload PDF
3C953000≈ 530≥ 215≈ 5MnZnFlat loss 25-100 °Cdownload PDF
3C973000≈ 530≥ 215≈ 5MnZnFlat loss 60-140 °Cdownload PDF
3C921500≈ 540≥ 280≈ 5MnZnHigh Bsatdownload PDF
3C95A3300≈ 550≥ 220≈ 10MnZnSquare B-H loopdownload PDF
3C95F3300≈ 550≥ 210≈ 10MnZnSquare B-H loopdownload PDF
3C92A1800≈ 570≥ 270≈ 5MnZnSquare B-H loopdownload PDF
 

High Freq

Materialienµi  bei 25°CBsat (mT) bei
25°C (1200 A/m)		Tc
(°C)		p (Ωm)Ferrit-TypBemerkungDatenblatt
4F180≈ 320≥ 260≈ 105NiZnfreq. < 15 MHzdownload PDF
3F32000≈ 440≥ 200≈ 2MnZnoptimal frequency
≤ 400 kHz		download PDF
3F361600≈ 520≥ 230≈ 12MnZnoptimal frequency
< 600 kHz,flat power loss 25-100 °C		download PDF
3F4900≈ 410≥ 220≈ 10MnZnoptimal frequency
< 2 MHz		download PDF
3F46750≈ 520≥ 280≈ 5MnZnoptimal frequency
< 2 MHz		download PDF
New Materials 2022
  • Power conversion material (3C92, 3C95, 3C96, 3C97, 3C98 and 3F36, 3F46)
  • High permeability material (3E10 – 3E12)
  • Wideband EMI suppression material (3N1, 3N3, 3N4, 3N5, 3N10)
Power Conversion Material
  • Higher frequencies (Miniaturization)
  • Lower losses
  • Higher DC-bias compliance (High Bast + Low Loss)
  • Wider temperature compatibility (Flat Loss)
Vertriebspartner führender Hersteller

Bei uns hat eine rasche Lieferbereitschaft oberste Priorität.

©  Megatron AG,  Wölferstrasse 5, 4414 Füllinsdorf, Switzerland  I  +41 55 617 00 88  I  info@megatron.ch

Impressum  I  Datenschutzerklärung  I AGB  I  Kontakt

Anfrage

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.

Bobbin RM14/I

Thermoplastic bobbins

NumberMountingDocument 1Document 2Document 3
 CPV-RM14/I-1S-12PD PTH Winding Spec Yellow Card Detailed Drawing
 CPV-RM14/I-1S-12PD-TZ PTH Winding Spec Yellow Card Detailed Drawing

Thermosetting Bobbins

NumberDetailled Drawing
 CSV-RM14-1S-12P-C Detailed Drawing
 CSV-RM14-1S-10P-C Detailed Drawing

Clips and Clamps

NumberMountingDocument 1Document 2Document 3
 CLI/P-RM14/I PTH Material Detailed Drawing 

Bobbin U20/16/7

Thermoplastic bobbins

NumberMountingDocument 1Document 2Document 3
 CPH-U20/16/7-1S-4P PTH Winding Spec Yellow Card Detailed Drawing

Bobbin U15/11/6

Thermoplastic bobbins

NumberMountingDocument 1Document 2Document 3
 CPH-U15/11/6-1S-4P PTH Winding Spec Yellow Card Detailed Drawing
 CPH-U15/11/6-2S-4P PTH Winding Spec Yellow Card Detailed Drawing

Bobbin RM12/ILP

CLIP bobbins

NumberDocument 3
 RM12/ILP Detailed Drawing

Bobbin RM12/I

Thermoplastic bobbins

NumberMountingDocument 1Document 2Document 3
 CPV-RM12/I-1S-12PD PTH Winding Spec Yellow Card Detailed Drawing
 CPV-RM12/I-1S-12PD-TZ PTH Winding Spec Yellow Card Detailed Drawing

Thermosetting Bobbins

NumberMountingDocument 1Document 2Document 3
 CSV-RM12-1S-11P-T PTH Winding Spec Yellow Card Detailed Drawing
 CSV-RM12-1S-12P-TZ PTH Winding Spec Yellow Card Detailed Drawing

Clips and Clamps

NumberMountingDocument 1Document 2Document 3
 CLI/P-RM12/I PTH Material Detailed Drawing 

Bobbin RM10/ILP

Thermoplastic bobbins

NumberMountingDocument 1Document 2Document 3
 CPV-RM10/ILP-1S-12PD PTH Winding Spec Yellow Card Detailed Drawing

Clips and Clamps

NumberMountingDocument 1Document 2Document 3
 CLI/P-RM10/ILP PTH Material Detailed Drawing 

Bobbin RM10/I

Thermoplastic bobbins

NumberMountingDocument 1Document 2Document 3
 CPV-RM10/I-1S-12PD PTH Winding Spec Yellow Card Detailed Drawing
 CPV-RM10/I-1S-12PD-TZ PTH Winding Spec Yellow Card Detailed Drawing

Thermosetting Bobbins

NumberMountingDocument 1Document 2Document 3
 CSV-RM10-1S-5P PTH Winding Spec Yellow Card Detailed Drawing
 CSV-RM10-1S-8P PTH Winding Spec Yellow Card Detailed Drawing
 CSV-RM10-1S-10P PTH Winding Spec Yellow Card Detailed Drawing
 CSV-RM10-2S-8P PTH Winding Spec Yellow Card Detailed Drawing
 CSV-RM10-2S-12P PTH Winding Spec Yellow Card Detailed Drawing

Clips and Clamps

NumberMountingDocument 1Document 2Document 3
 CLI/P-RM10/I PTH Material Detailed Drawing 

Bobbin RM8/ILP

Thermosetting Bobbins

NumberMountingDocument 1Document 2Document 3
 CSV-RM8/ILP-1S-10P-Z PTH Winding Spec Yellow Card Detailed Drawing
 CSV-RM8/ILP-1S-12P-Z PTH Winding Spec Yellow Card Detailed Drawing
 CSV-RM8/ILP-1S-10P-ZA PTH Winding Spec Yellow Card Detailed Drawing

Clips and Clamps

NumberMountingDocument 1Document 2Document 3
 CLI/P-RM8/ILP PTH Material Detailed Drawing 

Bobbin RM8/I

Thermoplastic bobbins

NumberMountingDocument 1Document 2Document 3
 CPV-RM8/I-1S-12PD-TZ PTH Winding Spec Yellow Card Detailed Drawing

Clips and Clamps

NumberMountingDocument 1Document 2Document 3
 CLI-RM8/I PTH Material Detailed Drawing 
 CLI/P-RM8/I PTH Material Detailed Drawing 

Bobbin RM8

Thermosetting Bobbins

NumberMountingDocument 1Document 2Document 3
 CSV-RM8-1S-4P PTH Winding Spec Yellow Card Detailed Drawing
 CSV-RM8-1S-5P PTH Winding Spec Yellow Card Detailed Drawing
 CSV-RM8-1S-8P-G PTH Winding Spec Yellow Card Detailed Drawing
 CSV-RM8-1S-8PL PTH Winding Spec Yellow Card Detailed Drawing
 CSV-RM8-1S-12P-G PTH Winding Spec Yellow Card Detailed Drawing
 CSV-RM8-2S-5P PTH Winding Spec Yellow Card Detailed Drawing
 CSV-RM8-2S-8P PTH Winding Spec Yellow Card Detailed Drawing
 CSV-RM8-2S-8PL PTH Winding Spec Yellow Card Detailed Drawing
 CSV-RM8-2S-12P PTH Winding Spec Yellow Card Detailed Drawing
 CSV-RM8-1S-8P-TA PTH Winding Spec Yellow Card Detailed Drawing
CSV-RM8-2S-8P-C
 		 Detailed Drawing
CSV-RM8-2S-12P-C
 		 Detailed Drawing
CSV-RM8-1S-12P-C
 		 Detailed Drawing

Clips and Clamps

NumberMountingDocument 1Document 2Document 3
 CLI/P-RM8 PTH Material Detailed Drawing 

Bobbin RM7/I LP

Clips and Clamps

NumberMountingDocument 3
 CLI-RM7/ILP Without Pins Detailed Drawing

Bobbin RM7/I

Thermosetting Bobbins

NumberMountingDocument 1Document 2Document 3
 CSV-RM7-1S-4P-C PTH Winding Spec Yellow Card Detailed Drawing
 CSV-RM7-1S-8P-C PTH Winding Spec Yellow Card Detailed Drawing
 CSV-RM7-2S-8P-TZ PTH Winding Spec Yellow Card Detailed Drawing
 CSV-RM7-1S-5P-C Detailed Drawing
 CSV-RM7-1S-C
 Detailed Drawing

Clips and Clamps

NumberMountingDocument 1Document 2Document 3
 CLI/P-RM7 PTH Material Detailed Drawing 
 CLI-RM7 SMD Material Detailed Drawing 

Bobbin RM6R

Thermosetting Bobbins

NumberMountingDocument 1Document 2Document 3
 CSV-RM6S/R-1S-4P-IZ PTH Winding Spec Yellow Card Detailed Drawing
 CSV-RM6S/R-2S-4P-IZ PTH Winding Spec Yellow Card Detailed Drawing
 CSV-RM6R-1S-6P-IZ-C PTH Winding Spec Yellow Card Detailed Drawing
 CSV-RM6R-2S-6P-IZ PTH Winding Spec Yellow Card Detailed Drawing

Clips and Clamps

NumberMountingDocument 1Document 2Document 3
 CLI/P-RM6 PTH Material Detailed Drawing 

Thermosetting Bobbins

Bobbin RM6S/ILP

NumberMountingDocument 1Document 2Document 3
 CSVS-RM6S/LP-1S-8P SMD Winding Spec Yellow Card Detailed Drawing
 CSVS-RM6S/LP-1S-8P-B SMD Winding Spec Yellow Card Detailed Drawing

Clips and Clamps

NumberMountingDocument 1Document 2Document 3
 CLI-RM6/ILP SMD Material Detailed Drawing 

Bobbin RM6S/I

Thermoplastic bobbins

NumberMountingDocument 1Document 2Document 3
 CPV-RM6S/I-1S-8PD PTH Winding Spec Yellow Card Detailed Drawing
 CPV-RM6S/I-1S-8PD-TZ PTH Winding Spec Yellow Card Detailed Drawing

Thermosetting Bobbins

NumberMountingDocument 1Document 2Document 3
 CSVS-RM6S-1S-8P SMD Winding Spec Yellow Card Detailed Drawing
 CSVS-RM6S-1S-8PB SMD Winding Spec Yellow Card Detailed Drawing
 CSVS-RM6S-1S-8P-T SMD Winding Spec Yellow Card Detailed Drawing

Clips and Clamps

NumberMountingDocument 1Document 2Document 3
 CLIP-RM6/I PTH Material Detailed Drawing 
 CLI-RM6/I SMD Material Detailed Drawing 

Bobbin RM6S

Thermosetting Bobbins

NumberMountingDocument 1Document 2Document 3
 CPV-RM6S/I-1S-8PD PTH Winding Spec Yellow Card Detailed Drawing
 CPV-RM6S/I-1S-8PD-TZ PTH Winding Spec Yellow Card Detailed Drawing

Clips and Clamps

NumberMountingDocument 1Document 2Document 3
 CSVS-RM6S-1S-8P SMD Winding Spec Yellow Card Detailed Drawing
 CSVS-RM6S-1S-8PB SMD Winding Spec Yellow Card Detailed Drawing
 CSVS-RM6S-1S-8P-T SMD Winding Spec Yellow Card Detailed Drawing

Bobbin RM5/ILP

Thermosetting Bobbins

NumberMountingDocument 1Document 2Document 3
 CSVS-RM5/LP-1S-8P SMD Winding Spec Yellow Card Detailed Drawing

Clips and Clamps

NumberMountingDocument 1Document 2Document 3
 CLI-RM4/5/ILP SMD Material Detailed Drawing 

Bobbin RM5/I

Thermoplastic bobbins

NumberMountingDocument 1Document 2Document 3
 CPV-RM5-1S-8PD-Z PTH Winding Spec Yellow Card Detailed Drawing

Thermosetting Bobbins

NumberMountingDocument 1Document 2Document 3
 CSVS-RM5-1S-8P SMD Winding Spec Yellow Card Detailed Drawing

Clips and Clamps

NumberMountingDocument 1Document 2Document 3
 CLI/P-RM4/5/I PTH Material Detailed Drawing 
 CLI-RM4/5 SMD Material Detailed Drawing 

Bobbin RM5

Thermosetting Bobbins

NumberMountingDocument 1Document 2Document 3
 CSV-RM5-1S-4P-IZ PTH Winding Spec Yellow Card Detailed Drawing
 CSV-RM5-2S-4P-IZ PTH Winding Spec Yellow Card Detailed Drawing
 CSV-RM5-1S-5P PTH Winding Spec Yellow Card Detailed Drawing
 CSV-RM5-1S-6P-G PTH Winding Spec Yellow Card Detailed Drawing
 CSV-RM5-2S-5P PTH Winding Spec Yellow Card Detailed Drawing
 CSV-RM5-2S-6P PTH Winding Spec Yellow Card Detailed Drawing
 CSV-RM5-1S-6P-TZ PTH Winding Spec Yellow Card Detailed Drawing
 CSV-RM5-2S-4P-C  Detailed Drawing
 CSV-RM5-1S-6P-G  Detailed Drawing

Clips and Clamps

NumberMountingDocument 1Document 2Document 3
 CLI/P-RM4/5 PTH Material Detailed Drawing 

Bobbin RM4/ILP

Thermosetting Bobbins

NumberMountingDocument 1Document 2Document 3
 CSVS-RM4/LP-1S-8PL SMD Winding Spec Yellow Card Detailed Drawing

Clips and Clamps

NumberMountingDocument 1Document 2Document 3
 CLI-RM4/5/ILP SMD Material Detailed Drawing 

Bobbin RM4/I

Thermoplastic bobbins

NumberMountingDocument 1Document 2Document 3
 CPVS-RM4-1S-6P SMD Winding Spec Yellow Card Detailed Drawing

Clips and Clamps

NumberMountingDocument 1Document 2Document 3
 CLI/P-RM4/5/I PTH Material Detailed Drawing 
 CLI-RM4/5 SMD Material Detailed Drawing 

Bobbin RM4

Thermosetting Bobbins

NumberMountingDocument 1Document 2Document 3
 CSV-RM4-1S-6P PTH Winding Spec Yellow Card Detailed Drawing
 CSV-RM4-1S-5P PTH Winding Spec Yellow Card Detailed Drawing
 CSV-RM4-2S-5P PTH Winding Spec Yellow Card Detailed Drawing
 CSV-RM4-2S-6P PTH Winding Spec Yellow Card Detailed Drawing
 CSVS-RM4LP-1S-8P-Z  Detailed Drawing
 CSV-RM4-1S-6P-C Detailed Drawing
 CSV-RM4-1S-5P-C  Detailed Drawing
 CSV-RM4-1S-5P  Detailed Drawing

Clips and Clamps

NumberMountingDocument 1Document 2Document 3
 CLI/P-RM4/5 PTH Material Detailed Drawing 

Bobbin PT23/11

Thermoplastic bobbins

NumberMountingDocument 1Document 2Document 3
 CPV-PT23/11-1S-10P-Z PTH Winding Spec Yellow Card Detailed Drawing
 CSV-PT23/11-1S-10P-C
 Detailed Drawing

Bobbin PT14/8

Thermoplastic bobbins

NumberMountingDocument 1Document 2Document 3
 CPV-PT14/8-1S-6P-Z PTH Winding Spec Yellow Card Detailed Drawing

Bobbin PQ50/50

Thermosetting Bobbins

NumberMountingDocument 1Document 2Document 3
 CSV-PQ50/50-1S-12P PTH Winding Spec Yellow Card Detailed Drawing

Bobbin PQ40/40

Thermosetting Bobbins

NumberMountingDocument 1Document 2Document 3
 CSV-PQ40/40-1S-12P PTH Winding Spec Yellow Card Detailed Drawing

Clips and Clamps

NumberMountingDocument 1Document 2Document 3
 CLM/P-PQ40/40 PTH Material Detailed Drawing 

Bobbin PQ35/35

Thermoplastic bobbins

NumberMountingDocument 1Document 2Document 3
 CPV-PQ35/35-1S-12P-Z PTH Winding Spec Yellow Card Detailed Drawing

Clips and Clamps

NumberMountingDocument 1Document 2Document 3
 CLM/P-PQ35/35 PTH Material Detailed Drawing 

Bobbin PQ32/30

Thermoplastic bobbins

NumberMountingDocument 1Document 2Document 3
 CPV-PQ32/30-1S-12P-Z PTH Winding Spec Yellow Card Detailed Drawing
 CPV-PQ32/30-1S-12PD-Z PTH Winding Spec Yellow Card Detailed Drawing

Clips and Clamps

NumberMountingDocument 1Document 2Document 3
 CLM/P-PQ32/30 PTH Material Detailed Drawing 

Bobbin PQ32/20

Thermoplastic bobbins

NumberMountingDocument 1Document 2Document 3
 CPV-PQ32/20-1S-12P-Z PTH Winding Spec Yellow Card Detailed Drawing
 CPV-PQ32/20-1S-12PD-Z PTH Winding Spec Yellow Card Detailed Drawing

Clips and Clamps

NumberMountingDocument 1Document 2Document 3
 CLM/P-PQ32/20 PTH Material Detailed Drawing 

Bobbin PQ26/25

Thermoplastic bobbins

NumberMountingDocument 1Document 2Document 3
 CPV-PQ26/25-1S-12P-Z PTH Winding Spec Yellow Card Detailed Drawing
 CPV-PQ26/25-1S-12PD-Z PTH Winding Spec Yellow Card Detailed Drawing

Clips and Clamps

NumberMountingDocument 1Document 2Document 3
 CLM/P-PQ26/25 PTH Material Detailed Drawing 

Bobbin PQ26/20

Thermoplastic bobbins

NumberMountingDocument 1Document 2Document 3
 CPV-PQ26/20-1S-12P-Z PTH Winding Spec Yellow Card Detailed Drawing
 CPV-PQ26/20-1S-12PD-Z PTH Winding Spec Yellow Card Detailed Drawing

Clips and Clamps

NumberMountingDocument 1Document 2Document 3
 CLM/P-PQ26/20 PTH Material Detailed Drawing 

Bobbin PQ20/20

Thermoplastic bobbins

NumberMountingDocument 1Document 2Document 3
 CPV-PQ20/20-1S-14P-Z PTH Winding Spec Yellow Card Detailed Drawing
 CPV-PQ20/20-1S-14PD-Z PTH Winding Spec Yellow Card Detailed Drawing

Clips and Clamps

NumberMountingDocument 1Document 2Document 3
 CLM/P-PQ20/20 PTH Material Detailed Drawing 

Bobbin PQ20/16

Thermoplastic bobbins

NumberMountingDocument 1Document 2Document 3
 CPV-PQ20/16-1S-14P-Z PTH Winding Spec Yellow Card Detailed Drawing
 CPV-PQ20/16-1S-14PD-Z PTH Winding Spec Yellow Card Detailed Drawing

Clips and Clamps

NumberMountingDocument 1Document 2Document 3
 CLM/P-PQ20/16 PTH Material Detailed Drawing 

Bobbin PM87/70

Thermoplastic bobbins

NumberMountingDocument 3
CPV-PM87/70-1S-C
 Without Pins Detailed Drawing

Bobbin PM74/59

Thermoplastic bobbins

NumberMountingDocument 3
 CP-PM74/59-1S Without Pins Detailed Drawing

Bobbin PM50/39

Bobbins

Ordering NameDatasheet
 CPV-PM50/39-1S-14PD-C
 Detailed Drawing
CLM/BPL/NW-PM50/39-C
 Detailed Drawing

Bobbin ER9.5/2.5/5

bobbins

Ordering nameDescriptionDatasheet
 CPVS-ER9.5-1S-8P-Z
Coil former, termoplastic, vertical, SMD Detailed Drawing
 CPVS-ER9.5-1S-8P-C
 Coil former, termoplastic, vertical, SMD Detailed Drawing
 CLM-ER9.5
 Clamp Detailed Drawing

Bobbin E64/10/50

Bobbins

Ordering NumberDatasheet
CLI-E64/10/50/R Detailed Drawing

Bobbin E18/4/10/R

Clips and Clamps

NumberMountingDocument 1Document 2Document 3
 CLM-E18/PLT18  Material Detailed Drawing 

Bobbin PLT14/5/1.5/S

Thermosetting Bobbins

NumberMountingDocument 1Document 2Document 3
 CLM-E14/PLT14  Material Detailed Drawing 

Bobbin E22/6/16/R

Clips and Clamps

NumberMountingDocument 1Document 2Document 3
 CLM-E22/PLT22  Material Detailed Drawing 

Bobbin P66/56

Thermoplastic bobbins

NumberMountingDocument 1Document 2Document 3
 CP-P66/56-1S-C Without Pins Winding Spec Yellow Card Detailed Drawing

Bobbin P42/29

Thermoplastic bobbins

NumberMountingDocument 1Document 2Document 3
 CP-P42/29-1S-C Without Pins Winding Spec Yellow Card Detailed Drawing
 CP-P42/29-2S-C Without Pins Winding Spec Yellow Card Detailed Drawing
 CP-P42/29-1S-B Without Pins Winding Spec Yellow Card Detailed Drawing

Mounting parts

NumberMountingDocument 1Document 2Document 3
 TGP-P42/29-C Without Pins Winding Spec Yellow Card Detailed Drawing
 CON-P42/29 Without Pins Material Detailed Drawing 
 SPR-P42/29 Without Pins Material Detailed Drawing 

Bobbin P36/22

Thermoplastic bobbins

NumberMountingDocument 1Document 2Document 3
 CP-P36/22-1S Without Pins Winding Spec Yellow Card Detailed Drawing
 CP-P36/22-2S Without Pins Winding Spec Yellow Card Detailed Drawing
 CP-P36/22-3S Without Pins Winding Spec Yellow Card Detailed Drawing
 CP-P36/22-1S-A Without Pins Winding Spec Yellow Card Detailed Drawing

Mounting parts

NumberMountingDocument 1Document 2Document 3
 TGP-P36/22-C PTH Winding Spec Yellow Card Detailed Drawing
 CON-P36/22 PTH Material Detailed Drawing 
 SPR-P36/22 PTH Material Detailed Drawing 

Bobbin P30/19

Thermoplastic bobbins

NumberMountingDocument 1Document 2Document 3
 CPV-P30/19-1S-6PD-Z PTH Winding Spec Yellow Card Detailed Drawing
 CPV-P30/19-1S-6PDL-Z PTH Winding Spec Yellow Card Detailed Drawing
 CP-P30/19-1S Without Pins Winding Spec Yellow Card Detailed Drawing
 CP-P30/19-2S Without Pins Winding Spec Yellow Card Detailed Drawing
 CP-P30/19-3S Without Pins Winding Spec Yellow Card Detailed Drawing
 CP-P30/19-1S-A Without Pins Winding Spec Yellow Card Detailed Drawing

Mounting parts

NumberMountingDocument 1Document 2Document 3
 CON-P30/19 Without Pins Material Detailed Drawing 
 SPR-P30/19 Without Pins Material Detailed Drawing 
 CLM/TS-P30/19-C
 Detailed Drawing
TGP-P30/19-C
 Detailed Drawing

Bobbin P26/16

Thermoplastic bobbins

NumberMountingDocument 1Document 2Document 3
 CPV-P26/16-1S-6PD-Z PTH Winding Spec Yellow Card Detailed Drawing
 CPV-P26/16-1S-6PDL-Z PTH Winding Spec Yellow Card Detailed Drawing
 CPV-P26/16-2S-6PD-Z PTH Winding Spec Yellow Card Detailed Drawing
 CPV-P26/16-2S-6PDL-Z PTH Winding Spec Yellow Card Detailed Drawing
 CPV-P26/16-3S-6PD-Z PTH Winding Spec Yellow Card Detailed Drawing
 CPV-P26/16-3S-6PDL-Z PTH Winding Spec Yellow Card Detailed Drawing
 CP-P26/16-1S Without Pins Winding Spec Yellow Card Detailed Drawing
 CP-P26/16-2S Without Pins Winding Spec Yellow Card Detailed Drawing
 CP-P26/16-3S Without Pins Winding Spec Yellow Card Detailed Drawing
 CP-P26/16-1S-A Without Pins Winding Spec Yellow Card Detailed Drawing

Mounting parts

NumberMountingDocument 1Document 2Document 3
 TGP-P26/16-8P-C Without Pins Winding Spec Yellow Card Detailed Drawing
 CON-P26/16 Without Pins Material Detailed Drawing 
 SPR-P26/16 Without Pins Material Detailed Drawing 
 CLM/TP-P26/16 Without Pins Material Detailed Drawing 
 CLM/TP-P26/16-C
 Detailed Drawing 
 CLM/S-P26/16-C
 Detailed Drawing 
 BPL-CLM/S-P26/16-C
 Detailed Drawing 

Bobbin P22/13

Thermoplastic bobbins

NumberMountingDocument 1Document 2Document 3
 CPV-P22/13-1S-6PD-Z PTH Winding Spec Yellow Card Detailed Drawing
 CPV-P22/13-1S-6PDL-Z PTH Winding Spec Yellow Card Detailed Drawing
 CPV-P22/13-3S-6PD-Z PTH Winding Spec Yellow Card Detailed Drawing
 CP-P22/13-1S Without Pins Winding Spec Yellow Card Detailed Drawing
 CP-P22/13-2S Without Pins Winding Spec Yellow Card Detailed Drawing
 CP-P22/13-3S Without Pins Winding Spec Yellow Card Detailed Drawing
 CP-P22/13-1S-A Without Pins Winding Spec Yellow Card Detailed Drawing

Mounting parts

NumberMountingDocument 1Document 2Document 3
 CON-P22/13 Without Pins Material Detailed Drawing 
 SPR-P22/13 Without Pins Material Detailed Drawing 
 CLM/S-P22/13-C Detailed Drawing
 BPL/R-CLM/C-P22/13-C Detailed Drawing
 TGP-P22/13-C Detailed Drawing

Bobbin P18/11

Thermoplastic bobbins

NumberMountingDocument 1Document 2Document 3
 CPV-P18/11-1S-6PD-Z PTH Winding Spec Yellow Card Detailed Drawing
 CPV-P18/11-2S-6PD-Z PTH Winding Spec Yellow Card Detailed Drawing
 CPV-P18/11-3S-6PD-Z PTH Winding Spec Yellow Card Detailed Drawing
 CP-P18/11-1S Without Pins Winding Spec Yellow Card Detailed Drawing
 CP-P18/11-2S Without Pins Winding Spec Yellow Card Detailed Drawing
 CP-P18/11-3S Without Pins Winding Spec Yellow Card Detailed Drawing
 CP-P18/11-1S-A Without Pins Winding Spec Yellow Card Detailed Drawing
 CP-P18/11-3S-A Without Pins Winding Spec Yellow Card Detailed Drawing

Mounting parts

NumberMountingDocument 1Document 2Document 3
 TGP-P18/11-C Without Pins Winding Spec Yellow Card Detailed Drawing
 CON-P18/11 Without Pins Material Detailed Drawing 
 SPR-P18/11 Without Pins Material Detailed Drawing 
 CLM/TP-P18/11-TZ Without Pins Material Detailed Drawing 
 CLM/C-P18/11-C Without Pins Material Detailed Drawing 
 BPLD-CLMC-P1811-C 432202145091 Without Pins Detailed Drawing

Bobbin P14/8

Thermoplastic bobbins

NumberMountingDocument 1Document 2Document 3
 CPV-P14/8-1S-4SPD-Z PTH Winding Spec Yellow Card Detailed Drawing
 CPV-P14/8-2S-4SPD-Z PTH Winding Spec Yellow Card Detailed Drawing
 CPV-P14/8-2S-4SPDL-Z PTH Winding Spec Yellow Card Detailed Drawing
 CPV-P14/8-1S-6PD-Z PTH Winding Spec Yellow Card Detailed Drawing
 CPV-P14/8-2S-6PD-Z PTH Winding Spec Yellow Card Detailed Drawing
 CPV-P14/8-2S-6PDL-Z PTH Winding Spec Yellow Card Detailed Drawing
 CPV-P14/8-2S-6SP-Z PTH Winding Spec Yellow Card Detailed Drawing
 CP-P14/8-1S Without Pins Winding Spec Yellow Card Detailed Drawing
 CP-P14/8-2S Without Pins Winding Spec Yellow Card Detailed Drawing
 CP-P14/8-1S-A Without Pins Winding Spec Yellow Card Detailed Drawing
 CP-P14/8-2S-A Without Pins Winding Spec Yellow Card Detailed Drawing
 CP-P14/8-3S-A Without Pins Winding Spec Yellow Card Detailed Drawing

Mounting parts

NumberMountingDocument 1Document 2Document 3
 TGP-P14/8-C Without Pins Winding Spec Yellow Card Detailed Drawing
 CON-P14/8 Without Pins Material Detailed Drawing 
 SPR-P14/8 Without Pins Material Detailed Drawing 
 CLM/TP-P14/8 Without Pins Material Detailed Drawing 
 CLM/TP-P14/8-TZ Without Pins Material Detailed Drawing 
 CLM/T-P14/8 Without Pins Material Detailed Drawing 
 CLM/C-P14/8 Without Pins Material Detailed Drawing 
 BPL/D-CLM/C-P14/8 Without Pins Material Detailed Drawing 
 BPL/R-CLM/C-P14/8 Without Pins Material Detailed Drawing 
 WAS-CLM/C-P14/8 Without Pins Material Detailed Drawing 
 WAS-CLM/TP-P14/8 Without Pins Material Detailed Drawing 

Bobbin P11/7

Thermoplastic bobbins

NumberMountingDocument 1Document 2Document 3
 CP-P11/7-1S Without Pins Winding Spec Yellow Card Detailed Drawing
 CP-P11/7-1S-A Without Pins Winding Spec Yellow Card Detailed Drawing
 CP-P11/7-1S-C Without Pins Winding Spec Yellow Card Detailed Drawing
 CP-P11/7-2S-A Without Pins Winding Spec Yellow Card Detailed Drawing

Mounting parts

NumberMountingDocument 1Document 2Document 3
 TGP-P11/7-C Without Pins Winding Spec Yellow Card Detailed Drawing
 CON-P11/7 Without Pins Material Detailed Drawing 
 SPR-P11/7 Without Pins Material Detailed Drawing 
 CLM/TP-P11/7-C Without Pins Detailed Drawing

Bobbin P9/5

Thermoplastic bobbins

NumberMountingDocument 1Document 2Document 3
 CP-P9/5-1S Without Pins Winding Spec Yellow Card Detailed Drawing
 CP-P9/5-1S-A Without Pins Winding Spec Yellow Card Detailed Drawing
 CP-P9/5-1S-C Without Pins Winding Spec Yellow Card Detailed Drawing
 CP-P9/5-1S-NC Without Pins Winding Spec Yellow Card Detailed Drawing
 CP-P9/5-2S-C Without Pins Winding Spec Yellow Card Detailed Drawing

Bobbin ETD54-24-19

Bobbins

Orderring nameDescriptionDatasheet
 CPH-ETD54-1S-22P-TZ Coil former, termoplastic, horizontal Detailed Drawing
CPH-ETD54-1S-22P Coil former, termoplastic, horizontal Detailed Drawing
CLI-ETD54 Clip Detailed Drawing

Bobbin ETD59

Thermoplastic bobbins

NumberMountingDocument 1Document 2Document 3
 CPH-ETD59-1S-24P PTH Winding Spec Yellow Card Detailed Drawing

Clips and Clamps

NumberMountingDocument 1Document 2Document 3
 CLI-ETD59 PTH Material Detailed Drawing 

Bobbin ETD54

Thermoplastic bobbins

NumberMountingDocument 1Document 2Document 3
 CPH-ETD54-1S-22P PTH Winding Spec Yellow Card Detailed Drawing
 CPH-ETD54-1S-22P-TZ PTH Winding Spec Yellow Card Detailed Drawing

Clips and Clamps

NumberMountingDocument 1Document 2Document 3
 CLI-ETD54 PTH Material Detailed Drawing 

Bobbin ETD49

Thermoplastic bobbins

NumberMountingDocument 1Document 2Document 3
 CPH-ETD49-1S-20P PTH Winding Spec Yellow Card Detailed Drawing
 CPH-ETD49-1S-20P PTH Winding Spec Yellow Card Detailed Drawing
 CPH-ETD49-1S-20P-C PTH Detailed Drawing

Clips and Clamps

NumberMountingDocument 1Document 2Document 3
 CLI-ETD49 PTH Material Detailed Drawing 

Bobbin ETD44

Thermoplastic bobbins

NumberMountingDocument 1Document 2Document 3
 CPH-ETD44-1S-18P PTH Winding Spec Yellow Card Detailed Drawing
 CPH-ETD44-1S-18P PTH Winding Spec Yellow Card Detailed Drawing

Clips and Clamps

 Number  Mounting  Document 1  Document 2  Document 3 
 CLI-ETD44 PTH Material Detailed Drawing 

Bobbin ETD39

Thermoplastic bobbins and Clips

NumberDocument 2
 CPH-ETD39-1S-16P Detailed Drawing
 CPH-ETD39-1S-16P-C Detailed Drawing
 CLI-ETD39  Detailed Drawing

Bobbin ETD34

Thermoplastic bobbins

NumberMountingDocument 1Document 2Document 3
 CPH-ETD34-1S-14P PTH Winding Spec Yellow Card Detailed Drawing
CPV-ETD34-1S-14P-C Detailed Drawing

Thermosetting Bobbins

NumberMountingDocument 1Document 2Document 3
 CSCI-ETD34-1S-7P-T PTH Winding Spec Yellow Card Detailed Drawing
 CSCO-ETD34-1S-7P-T PTH Winding Spec Yellow Card Detailed Drawing

Clips and Clamps

NumberMountingDocument 1Document 2Document 3
 CLI-ETD34 PTH Material Detailed Drawing 

Bobbin ETD29

Thermoplastic bobbins

NumberMountingDocument 1Document 2Document 3
 CPH-ETD29-1S-13P PTH Winding Spec Yellow Card Detailed Drawing
 CPH-ETD29-1S-13P-C Detailed Drawing

Clips and Clamps

NumberMountingDocument 1Document 2Document 3
 CLI-ETD29 PTH Material Detailed Drawing 

Bobbin EQ20/R

Clips and Clamps

NumberMountingDocument 1Document 2Document 3
 CLM-EQ20/PLT20 PTH Material Detailed Drawing 

Bobbin EQ30

Thermosetting Bobbins

NumberMountingDocument 1Document 2Document 3
 CSV-EQ30-1S-10P PTH Winding Spec Yellow Card Detailed Drawing
 CSV-EQ30/16/20-1S-10P-Z Detailed Drawing

Bobbin EPX7

Clips and Clamps

NumberMountingDocument 1Document 2Document 3
 CLM-EPX7 SMD Material Detailed Drawing 

Bobbin EP20

Thermosetting Bobbins

NumberMountingDocument 1Document 2Document 3
 CSH-EP20-1S-10P-T PTH Winding Spec Yellow Card Detailed Drawing
 CSH-EP20-2S-10P-T PTH Winding Spec Yellow Card Detailed Drawing

Clips and Clamps

NumberMountingDocument 1Document 2Document 3
 CLA-EP20-Z PTH Material Detailed Drawing 
 SPR-EP20-Z PTH Material Detailed Drawing 

Bobbin EP17

Thermosetting Bobbins

NumberMountingDocument 1Document 2Document 3
 CSH-EP17-1S-8P PTH Winding Spec Yellow Card Detailed Drawing
 CSH-EP17-2S-8P PTH Winding Spec Yellow Card Detailed Drawing

Clips and Clamps

NumberMountingDocument 1Document 2Document 3
 CLA-EP17 PTH Material Detailed Drawing 
 SPR-EP17 PTH Material Detailed Drawing 

Thermoplastic bobbins

Bobbin EP13

NumberMountingDocument 1Document 2Document 3
 CPHS-EP13-1S-10P-Z SMD Winding Spec Yellow Card Detailed Drawing
 CPHS-EP13-2S-10P-Z SMD Winding Spec Yellow Card Detailed Drawing

Thermosetting Bobbins

NumberMountingDocument 1Document 2Document 3
 CSH-EP13-1S-10P-T PTH Winding Spec Yellow Card Detailed Drawing
 CSH-EP13-1S-10P PTH Winding Spec Yellow Card Detailed Drawing
 CSH-EP13-2S-10P PTH Winding Spec Yellow Card Detailed Drawing
 CSHS-EP13-1S-10P-T SMD Winding Spec Yellow Card Detailed Drawing

Bobbin EP10

Thermosetting Bobbins

NumberMountingDocument 1Document 2Document 3
 CSH-EP10-1S-8P PTH Winding Spec Yellow Card Detailed Drawing
 CSH-EP10-2S-8P PTH Winding Spec Yellow Card Detailed Drawing
 CSHS-EP10-1S-8P-T SMD Winding Spec Yellow Card Detailed Drawing

Clips and Clamps

NumberMountingDocument 1Document 2Document 3
 CLA-EP10 PTH Material Detailed Drawing 
 SPR-EP10 PTH Material Detailed Drawing 
 CLI-EP10 SMD Material Detailed Drawing 

Bobbin EP5

Thermoplastic bobbins

NumberMountingDocument 1Document 2Document 3
 CPHS-EP5-1S-6P SMD Winding Spec Yellow Card Detailed Drawing

Clips and Clamps

NumberMountingDocument 1Document 2Document 3
 CLI-EP5/6 SMD Material Detailed Drawing 

Bobbin EP7

Thermosetting Bobbins

NumberMountingDocument 1Document 2Document 3
 CSH-EP7-1S-4P-BZ PTH Winding Spec Yellow Card Detailed Drawing
 CSH-EP7-1S-6P-BZ PTH Winding Spec Yellow Card Detailed Drawing
 CSH-EP7-1S-6P-TZ PTH Winding Spec Yellow Card Detailed Drawing
 CSH-EP7-2S-4P-TA PTH Winding Spec Yellow Card Detailed Drawing
 CSH-EP7-2S-6P-IZ PTH Winding Spec Yellow Card Detailed Drawing
 CSHS-EP7-1S-6P-Z SMD Winding Spec Yellow Card Detailed Drawing
 CSHS-EP7-1S-5P-Z SMD Winding Spec Yellow Card Detailed Drawing
 CSHS-EP7-1S-8P-LZ SMD Winding Spec Yellow Card Detailed Drawing
 CPHS-EP7-2S-6P-C
 SMD Winding Spec

Clips and Clamps

NumberMountingDocument 1Document 2Document 3
 CLI/P-EP7 PTH Material Detailed Drawing 
 CLI-EP7 SMD Material Detailed Drawing 
CLI-EP7-B SMD Detailed Drawing

Bobbin EC70

Thermoplastic bobbins

NumberMountingDocument 1Document 2Document 3
 CP-EC52-1S Without Pins Winding Spec Yellow Card Detailed Drawing

Mounting parts

NumberMountingDocument 1Document 2Document 3
 PIN/V-EC52 Without Pins Material Detailed Drawing 
 CLM/U-EC52-C Without Pins Material Detailed Drawing 
 BPL4-EC52-C Without Pins Material Detailed Drawing 

Bobbin EC52

Thermoplastic bobbins

NumberMountingDocument 1Document 2Document 3
 CP-EC52-1S Without Pins Winding Spec Yellow Card Detailed Drawing

Mounting parts

NumberMountingDocument 1Document 2Document 3
 PIN/V-EC52 Without Pins Material Detailed Drawing 
 CLM/U-EC52-C Without Pins Material Detailed Drawing 
 BPL4-EC52-C Without Pins Material Detailed Drawing 

Bobbin EC41

Thermoplastic bobbins

NumberMountingDocument 1Document 2Document 3
 CP-EC41-1S Without Pins Winding Spec Yellow Card Detailed Drawing

Mounting parts

NumberMountingDocument 1Document 2Document 3
 PIN/V-EC41 Without Pins Material Detailed Drawing 
 CLM/U-EC41-C Without Pins Material Detailed Drawing 
 BPL4-EC41-C Without Pins Material Detailed Drawing 

Bobbin EC35

Thermoplastic bobbins

NumberMountingDocument 1Document 2Document 3
 CP-EC35-1S Without Pins Winding Spec Yellow Card Detailed Drawing

Thermosetting Bobbins

NumberMountingDocument 1Document 2Document 3
 CSH-EC35-1S-11PD-A-Z PTH Winding Spec Yellow Card Detailed Drawing

Mounting parts

NumberMountingDocument 1Document 2Document 3
 CLM/U-EC35-C Without Pins Material Detailed Drawing 
 BPL2-EC35 Without Pins Material Detailed Drawing 
 BPL4-EC35 Without Pins Material Detailed Drawing 

Bobbin E65/32/27

Thermoplastic bobbins

Ordering Name DescriptionDatasheet
 CLA-E65/32/27  Clasp  Detailed Drawing
 CP-E65/32/27-1S  Coil former, termoplastic Detailed Drawing
 SPR-E65/32/27  Spring Detailed Drawing

Bobbin E56/24/19

Thermoplastic bobbins

Ordering NameDescriptionDatasheet
CPH-E56/24/19-1S-12PD-Z Coil former, termoplastic, horizontal  Detailed Drawing

Bobbin E55/28/21

Thermoplastic bobbins

Ordering NameDescriptionDatasheet
CLA-E55/28/21 Clasp Detailed Drawing
 CP-E55/28/21-1S  Coil former, termoplastic Detailed Drawing
 CP-E55/28/21-1S-A  Coil former, termoplastic Detailed Drawing
 CPH-E55/28/21-1S-22P-Z  Coil former, termoplastic, horizontal Detailed Drawing
 SPR-E55/28/21  Spring  Detailed Drawing

Bobbin E42/21/20

Thermoplastic bobbins

NumberDocument 3
 CP-E42/21/20-1S Detailed Drawing

Bobbin E42/21/15

Thermoplastic bobbins

Ordering name descriptionDatasheet
 SPR-E42/21/15Spring Detailed Drawing
CLA-E42/21/15 Clasp Detailed Drawing
CP-E42/21/15-1S Coil former, termoplastic Detailed Drawing
CPH-E42/21/15-1S-10P Coil former, termoplastic, horizontal Detailed Drawing

Bobbin E25/13/11

Thermoplastic bobbins

NumberMountingDocument 1
 CPV-E251311-1S-8P Detailled Drawing

Bobbin E34/14/9

Thermoplastic bobbins

NumberMountingDocument 1Document 2Document 3
 CPH-E34/14/9-1S-12PD-Z PTH Winding Spec Yellow Card Detailed Drawing

Bobbin E32/16/9

Thermoplastic bobbins

NumberMountingDocument 1Document 2Document 3
 CPH-E32/16/9-1S-12P PTH Winding Spec Yellow Card Detailed Drawing

Bobbin 30/15/7

Thermoplastic bobbins

NumberMountingDocument 1Document 2Document 3
 CP-E30/15/7-1S Without Pins Winding Spec Yellow Card Detailed Drawing

Thermosetting Bobbins

NumberMountingDocument 1Document 2Document 3
 CSH-E30/15/7-1S-10P-IZ PTH Winding Spec Yellow Card Detailed Drawing
 CSH-E30/15/7-1S-12P-C PTH Winding Spec Yellow Card Detailed Drawing
 CSH-E30/15/7-1S-12P-T PTH Winding Spec Yellow Card Detailed Drawing

Clips and Clamps

NumberMountingDocument 1Document 2Document 3
 CLA-E30/15/7 PTH Material Detailed Drawing 
 SPR-E30/15/7 PTH Material Detailed Drawing 

Bobbin E25/13/7

Thermoplastic bobbins

NumberMountingDocument 1Document 2Document 3
 CPV-E25/13/7-1S-10P-Z PTH Winding Spec Yellow Card Detailed Drawing
 CPH-E25/13/7-1S-10P PTH Winding Spec Yellow Card Detailed Drawing

Thermosetting Bobbins

NumberMountingDocument 1Document 2Document 3
 CSV-E25/13/7-1S-6P-C PTH Winding Spec Yellow Card Detailed Drawing
 CSH-E25/13/7-1S-8P-C PTH Winding Spec Yellow Card Detailed Drawing

Clips and Clamps

NumberMountingDocument 1Document 2Document 3
 CLI-E25/13/7 PTH Material Detailed Drawing 

Bobbin E25/10/6

Thermoplastic bobbins

NumberMountingDocument 1Document 2Document 3
 CPH-E25/10/6-1S-10P-Z PTH Winding Spec Yellow Card Detailed Drawing
 CP-E25/10/6-1S Without Pins Winding Spec Yellow Card Detailed Drawing

Clips and Clamps

NumberMountingDocument 1Document 2Document 3
 CLM E25/10/6 PTH Material Winding Spec Detailed Drawing

Bobbin E13/6/6

Thermoplastic bobbins

NumberMountingDocument 1Document 2Document 3
 CP-E13/6/6-1S Without Pins Winding Spec Yellow Card Detailed Drawing
 CP-E13/6/6-1S-A Without Pins Winding Spec Yellow Card Detailed Drawing

Bobbin E16/8/5

Thermoplastic bobbins

NumberMountingDocument 1Document 2Document 3
 CPH-E16/8/5-1S-6P-Z PTH Winding Spec Yellow Card Detailed Drawing
 CP-E16/8/5-1S Without Pins Winding Spec Yellow Card Detailed Drawing

Thermosetting Bobbins

NumberMountingDocument 1Document 2Document 3
 CSH-E16/8/5-1S-6P-C PTH Winding Spec Yellow Card Detailed Drawing

Bobbin E19/8/5

Thermoplastic bobbins

NumberMountingDocument 1Document 2Document 3
 CPH-E19/5-1S-8PD-Z PTH Winding Spec Yellow Card Detailed Drawing
 CPH-E19/8/5-2S-4P-C PTH Winding Spec Yellow Card Detailed Drawing
 CPH-E19/8/5-4S-10P PTH Winding Spec Yellow Card Detailed Drawing

Bobbin E19/8/9

Thermoplastic bobbins

NumberMountingDocument 1Document 2Document 3
 CP-E19/8/9-1S Without Pins Winding Spec Yellow Card Detailed Drawing

Bobbin E20/10/5

Thermoplastic bobbins

NumberMountingDocument 1Document 2Document 3
 CPV-E20/10/5-1S-6P PTH Winding Spec Yellow Card Detailed Drawing

Thermosetting Bobbins

NumberMountingDocument 1Document 2Document 3
 CSH-E20/10/5-1S-8P-IZ PTH Winding Spec Yellow Card Detailed Drawing
 CSH-E20/10/5-1S-8P-C PTH Detailed Drawing

Clips and Clamps

NumberMountingDocument 1Document 2Document 3
 CLA-E20/10/5 PTH Material Detailed Drawing 
 SPR-E20/10/5 PTH Material Detailed Drawing 

Bobbin E20/10/6

Thermoplastic bobbins

NumberMountingDocument 1Document 2Document 3
 CPH-E20/10/6-1S-8P PTH Winding Spec Yellow Card Detailed Drawing
 CPCI-E20/6-1S-5P-TZ PTH Winding Spec Yellow Card Detailed Drawing
 CPCO-E20/6-1S-5P-TZ PTH Winding Spec Yellow Card Detailed Drawing

Thermosetting Bobbins

NumberMountingDocument 1Document 2Document 3
 CSH-E20/10/6-1S-8P-C PTH Winding Spec Yellow Card Detailed Drawing

Bobbin E13/7/4

Clips and Clamps

NumberMountingDocument 1Document 2Document 3
 CPH-E13/7/4-1S-6P PTH Winding Spec Yellow Card Detailed Drawing